0102030405
4-Way Shuttle
Product Parameters
| Shuttle Size | 1110×940×150mm (standard type), ultra-thin type with thickness 120mm, customizable |
| Rated Load | 0.5-2 tons |
| Operating Speed | No-load: 90m/s; Full-load: 72m/s |
| Commutation Time | 2.5 seconds |
| Positioning Accuracy | ±2mm (RFID + laser positioning) |
| Battery Life | 6-10 hours (6-8 hours in low-temperature environment) |
| Charging Time | 1-2 hours (automatic charging pile) |
| Applicable Temperature | -25℃ to 45℃ |
| Rack Adaptability | Supports single-deep and multi-deep combined storage, rack aisle width 1-1.2 meters |
Functional Features
Omnidirectional movement and cross-aisle operation
The 4-way shuttle adopts a dual-wheel system design, supporting travel in four directions (forward, backward, left, right), and the storage space utilization rate is increased by 30%-50% compared with traditional systems.
Dynamic scheduling and flexible expansion
The system supports adjusting the operation capacity by increasing or decreasing the number of shuttles. During peak business periods, equipment can be temporarily purchased to cope with order peaks, and later the equipment can be transferred to other warehouses.
Intelligent monitoring and safety redundancy
The equipment is equipped with laser navigation, QR code positioning and RFID identification technology. The safety system includes collision detection, emergency stop device, power monitoring and automatic charging functions, with a failure rate of less than 0.01%.
Technical Advantages
Maximized space utilization: Through narrow aisle design and three-dimensional space utilization, the storage capacity of warehouses with the same area can be increased by 5-10 times.
Balanced efficiency and stability: High-speed servo motor drive and S-curve acceleration/deceleration technology ensure stable operation and accurate positioning.
Controllable cost and full-life cycle optimization: The initial construction cost is 40% lower than that of the stacker system, the construction period is shortened by 60%, the later maintenance cost is only 1/3 of that of the stacker, and energy consumption is saved by 50%.
Modular design supports rapid customization.